Sanosil S010
Disinfectant for aerosol application suited for high germ load
Sanosil S010 is the strongest disinfectant in the Sanosil range and used without diluting. Besides being effective against bacteria, viruses, yeasts and fungi, Sanosil S010 is also capable of neutralising certain fungi (e.g. aflatoxins) through oxidation.
This is why S010 is the preferred aerosol for mould remediation. Contrary to application with paint rolls and brushes, the aerosol also captures and combats airborne mould spores and their components. However, please note that a thick mould layer cannot be combated through aerosol disinfection alone. Surfaces showing visible mould infestation must be treated beforehand with a brush or roll.
Sanosil S010 can be filled directly into a suitable aerosol device without dilution and/or addition of fogging agents and then sprayed.
Due to the share of water in the formula, there is no risk of fire or explosion.
The treated room can be used again without hesitation after approx. 1 to 2 hours.
Sanosil S010 is the product of choice in:
Mould remediation
Highly contaminated problematic cases (e.g. compulsive hoarder flats)
Suitability:
- Aerosol disinfection, surface disinfection, spray disinfection
Product tye:
- Ready to use
Effectiveness:
- Bacteria, viruses, yeasts, fungi, broad protozoa spectrum
Contact time:
60 min.
Packaging:
5kg, 10kg, 25kg, 200kg, 1000kg
Shelf life:
2 years
Active ingredients:
Hydrogen peroxide and silver
.
Read more ...
